No results were found for the filter!
Chain hub adjustment tool - large excenter
Special tool for easy adjustment of the rear swingarm chain with the large excenter • CNC machined from stainless-steel What do you get. 1x Tool We have you covered. • First class pre-& after sales support • 2-year EU-conform warranty •...
€39.14
ClubSport Brake lever, long with foldable pivot
ClubSport brake lever, long with foldable pivot, 25 mm / 25 position reach adjustability • Lever is designed for ergonomic 2- 4 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position...
€90.00
ClubSport Brake lever, short with foldable pivot
ClubSport brake lever, short with foldable pivot, 25 mm / 25 position reach adjustability • Lever designed for ergonomic 2- 3 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position reach...
€85.00
ClubSport clutch lever, long with foldable pivot
ClubSport clutch lever, long with foldable pivot, 25 mm / 25 position reach adjustability • Lever designed for ergonomic 2- 4 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position reach...
€90.00
ClubSport clutch lever, short with foldable pivot
ClubSport clutch lever, short with foldable pivot, 25 mm / 25 position reach adjustability • Lever is designed for ergonomic 2- 3 finger operation with excellent grip, optimal modulation and maximum control • Up to 25 mm / 25 position...
€85.00
ClubSport spare lever blade - Long
ClubSport spare lever blade - Long for foldable-pivot brake & clutch levers • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Black stainless-steel hardware (Tighten to 6 Nm and use...
€33.00
ClubSport spare lever blade - Short
ClubSport spare lever blade - Short for foldable brake & clutch levers • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Black stainless-steel hardware (Tighten to 6 Nm and use 243...
€30.60
Clutch slave cylinder protection
Whether on the race track or on the road, this protector saves the clutch slave cylinder from crashes, stone chips and from damage if the chain comes off or breaks • Clutch slave cylinder protection CNC machined from high-tensile...
€49.20
Crash / slider pads - fork
Race track proven crash pads, specifically designed to protect front forks. • Sturdy crash-proven design • Made from abrasion-resistant Polyamide PA6 material and high-tensile 6082 grade, heat-treated Aluminium • Laser etched MG Biketec...
€43.49
Front wheel spacer sleeves L & R with chamfer
Spacer sleeves with chamfer specially developed for KTM front wheels. • Makes changing wheels easier and faster - spacer sleeves no longer fall out! • CNC machined from high-tensile 7075 grade, heat-treated billet Aluminium •...
€39.90
Gear shift shaft support - Shift stabilizer
Gear shift shaft support - made to avoid mis-shifts and to increase gear shift performance • This additional brace includes a ball bearing and offers significantly better and more precise shifting • The shift feel becomes more precise...
€59.40
NEW
generator cover screw
• Generator cover screw CNC machined from high-strength aluminum • Anodized in black or orange You will receive: • 1x generator cover screw • 1x O-ring We have you covered. • First class pre-& after sales support • 2-year EU-conform...
€18.00
Handlebar end mirror type 2 black EG/EEC
• CNC machined from high-strength 6082, heat-treated aluminum • fully anodized in black • Suitable for handlebars with an inner diameter of 14 to 17 mm. • The mirror can be used for the left and right side. • Laser engraved MG Biketec...
€79.00
Handlebar end mirror type 3 black EG/EEC
• CNC machined from high-strength 6082, heat-treated aluminum • fully anodized in black • Suitable for handlebars with an inner diameter of 14 to 17 mm. • The mirror can be used for the left and right side. • Laser engraved MG Biketec...
€79.00
Handlebar end mirror type 4 black EG/EEC
• CNC machined from high-strength 6082, heat-treated aluminum • fully anodized in black • Suitable for handlebars with an inner diameter of 14 to 17 mm. • The mirror can be used for the left and right side. • Laser engraved MG Biketec...
€79.00
Handlebar ends - Universal 14 mm
Help minimize handlebar damage in the event of a crash. • CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Bolt directly onto the handlebars with 14 mm inside diameter • Fully anodized and available in black,...
€31.61
NEW
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
NEW
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
NEW
Mirror set for M10 x 1,25 mm thread
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Fully anodized in black • Laser etched MG Biketec logo • Extremely lightweight • Stainless-steel hardware What do you get. • 1x mirror set incl. M10 x 1,25 mm...
€149.00
Oil filler cap
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces the original plastic part • Anodized in black, blue and orange • Laser etched MG Biketec logo • Extremely lightweight • Wire-lock-ready for...
€20.60
Racing rear set
Race tested rear set, fully ergonomically adjustable in 18 positions and up to 45 mm • CNC machined from high-tensile 7075 & 6082 grade, heat-treated billet Aluminium • Backlash-free shift and brake levers, double-ball bearing mounted,...
€524.29
NEW
Rear wheel nut 1/2 inch for KTM Super Duke R /...
Special tool for opening the wheel nut 60mm • CNC machined from stainless-steel • Black anodized What do you get. 1x Tool We have you covered. • First class pre-& after sales support • 2-year EU-conform warranty • Free lifetime...
€34.80
Reservoir cover - clutch
• CNC machined from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces original plastic parts • Anodized in black, orange • Laser etched MG Biketec logo • Extemely lightweight What do you get. • 1x reservoir cover...
€31.60
Reservoir cover - front brake
• CNC milled from high-tensile 6082 grade, heat-treated billet Aluminium • Directly replaces original plastic parts • Anodized in black, orange • Laser etched MG Biketec logo • Extremely lightweight • Incl. Stainless-steel bolts What do...
€42.51
Top seller
Viewed